Fits 03 – 07 5.9L, 07.5 – 18 6.7L
Stock 24v springs have 78-82lbs of seat pressure at 1.380″. If you are over 35psi(boost or drive pressure), stock springs do not fully
control the valvetrain. Intake and exhaust valves can be blown open by
boost and exhaust drive pressure which allows reversion. Reversion can
hurt your power potential by allowing exhaust gasses to enter the
cylinder on the intake stroke. Inert gasses in the exhaust, when
re-introduced into the cylinder shield the fuel particles from oxygen in
the cylinder. This does a few things that negatively affect power. It
increases the time delay from start of injection to start of combustion,
it decreases the maximum pressure and maximum temperature reached in
the cylinder and it increases the total time needed to completely burn
the available fuel. Correct valve spring pressure is a very important
piece of power production. Hamilton springs solve this problem.
Nose pressure has been lowered from 220lb to 180lb recently. Watch
out for other companies that have nose pressures over 250lb. Your cam
will have a shorter life with high rate springs. Don’t just ask what
seat pressure is when you are shopping for springs, ask what the
pressure is on the nose(1.031″ with OEM cams or .958″ with the 188-220)
Lately we have seen a few cams damaged when customers run cheaper
aftermarket springs from other shops. We only offer warranty on our cams
with our cams if you run our springs and tappets. These springs are
great to 4500 rpm. Over that the #110 springs are necessary. Over 4500
rpm with #103 springs you will see broken or cracked retainers due to
float and harsh valve actuation.
*tool steel retainers are not included but can be purchased separately.
NOTE: MANUFACTURER WILL NOT SHIP TO CALIFORNIA.