Stainless Diesel 24V T3 Manifold
Stainless Diesel exhaust manifolds come with 2 ports drilled
and tapped for EGT & Drive.
These exhaust manifolds are
made with shell molding its a super smooth inside and out casting
technology that has superior flow over and above the old type 60 grit
sand paper like looking and filling casting that all the other exhaust
manifolds are made from.
- The manifolds have 3/4 inch thick center section [for those of you that
like to custom port to your specs]
- Thick wall casting to keep heat in
and the inside runner sizing is 1.650 inchs all the way to the center
outlet for high flow.
- The stainless manifolds make large turbos more
drive-able, improves spool-up several hundred RPM's.
- Improves
horsepower and widens powerband.
- Increased economy, when installed with
same mods.
- Excellent fit & finish!
- Has superior flow over the
competitors.
- Has large 1.65" ports, full length to collector foot.
- Smooth runners with extra porting room.
- T-3 Stainless Diesel manifold is in the same location as the OEM
manifold. It's a direct factory replacement for your Dodge Cummins
truck.