10lbs / min approx 1100 horsepower
- 360 degree thrust bearing
- Compressor cover integrated speed sensor port and pre-machined boost port
- Flexible compressor cover outlet options (S300SX-E only)
- Forged milled (billet) compressor wheels with extended tip technology
- Optimized compressor stage aerodynamics
- Interchangeable with existing turbine housings for upgradability
The
BorgWarner super core assembly consists of the compressor cover
attached to the cartridge, all cartridge to turbine housing mounting
hardware, clamp plates, cap screws and mounting gaskets. Speed sensor
and turbine outlet V-band are not included with turbo assemblies.
Choose a turbine housing from our extensive list of factory housings as
well as our custom cast performance housings.
Compressor Specs:
- Borg Warner 4" Inlet 2.5" outlet compressor housing with port
shroud map width enhancement, pre tapped for speed sensor and pressure
port. (parts not included and will need to drill through)
- 72.00mm inducer 91.00mm exducer FMW Forged Milled Wheel (Billet)
2nd Gen Machined V Band discharge for
1994-2002 Ram Cummins 5.9
Turbine Specs:
- 73mm exducer, 80mm inducer turbine wheel
The bearing housings are not water-cooled and have a 1/4"NPT oil
inlet. The oil drain is the standard T3-T4.