Steed Speed 2nd Gen 24V T3 Exhaust Manifolds
2nd Gen Style 24V T3. The only manifold available to give a substantial gain in power and fuel economy.
Not cheap cast and not weak tubular. This is a fully CNC machined billet turbo manifold. See options.
Steed Speed 12V T3 Exhaust Manifolds
In stock at the moment! The only manifold available to give a substantial gain in power and fuel economy.
Not cheap cast and not weak tubular. This is a fully CNC machined billet turbo manifold.
Steed Speed T3 24V Exhaust Manifold Twin Turbo Inverted Gate
Designed for twin turbo applications this manifold is intended to be run with the turbo flange facing up and has an inverted wastegate on the short side which would then be facing up and is offset away from the turbine housing to give clearance to the wastegate. The wastegate flange is fully divided to the wastegate valve face preserving the twin scroll effect perfectly. Special Order. ETA 8-10 weeks.
Steed Speed T3 12V Exhaust Manifold Twin Turbo Inverted Gate
Designed for twin turbo applications this manifold is intended to be run with the turbo flange facing up and has a wastegate on the short side which would then be facing up and is offset away from the turbine housing to give clearance to the wastegate. The wastegate flange is fully divided to the wastegate valve face preserving the twin scroll effect perfectly. The manifold comes with all gaskets and turbo mounting hardware.
Steed Speed T4 24V Exhaust Manifold
IN STOCK The only manifold available to give a substantial gain in power and fuel economy.
Not cheap cast and not weak tubular. This is a fully CNC machined billet turbo manifold. See options.
Steed Speed 12V T4 Exhaust Manifold Angled Flange
IN STOCK. 12V T4 Angled Flange Manifold. The only manifold available to give a substantial gain in power and fuel economy.
Not cheap cast and not weak tubular. This is a fully CNC machined billet turbo manifold. See options.
Diesel Power Source 3 Piece Exhaust Manifold 24V T3
2nd Gen 24V T3 exhaust manifold cast from ductile iron to handle extreme heat, and includes 3 drilled and tapped ports for pyrometer and pressure fitting, one even in the bottom. Comes with block gaskets, and 2 new bolts (used to attach to head on two upper center holes).
Diesel Power Source 3 Piece Exhaust Manifold 12V T3
12V T3 exhaust manifold cast from ductile iron to handle extreme heat, and includes 3 drilled and tapped ports for pyrometer and pressure fitting, one even in the bottom. Comes with block gaskets, and 12 new bolts (used to attach to head on two upper center holes).
Stainless Diesel Exhaust Manifold T3 24V
Stainless Exhaust mainfolds are made with shell molding. Its a super smooth inside and out casting technology that has superior flow over and above the old type 60 grit sand paper like and filling casting that all the other exhaust manifolds are made from.
Stainless Diesel Exhaust Manifold T3 12V
This will be the LAST Manifold you'll ever purchase --- with a ZERO percent failure rate!!! Stainless Diesel exhaust manifolds ARE MADE IN THE USA !!!! They come with 2 ports drilled and tapped for EGT & Drive.
Stainless Diesel Exhaust Manifold T4 24V
This will be the LAST Manifold you'll ever purchase --- with a ZERO percent failure rate!!! Stainless Diesel exhaust manifolds ARE MADE IN THE USA !!!! They come with 2 ports drilled and tapped for EGT & Drive .
Stainless Diesel Exhaust Manifold T6 12V
T-6 12 Valve MONSTER FOOT Stainless Diesel Cummins Exhaust manifold.
This will be the LAST Manifold you'll ever purchase --- with a ZERO percent failure rate!!! Stainless Diesel exhaust manifolds ARE MADE IN THE USA and come with 2 ports drilled and tapped for EGT & Drive.
HX40 Downpipe with Clamp
DIAMOND EYE MANUFACTURING Aluminized DOWNPIPE fitting Dodge Cummins trucks 1994-2002 . 4 inch TURBO-DIRECT W/ V-BAND CLAMP FITTING HX40
List Price: $278.67
Our Price: $222.95
MBRP HX40 Downpipe with Clamp
MBRP Aluminized DOWNPIPE fitting Dodge Cummins trucks 1994-2002 . 4 inch TURBO-DIRECT fits HX40, comes with replacement Vband clamp
List Price: $179.11
Our Price: $145.00
Crazy Carls Exhaust Manifold Studs and Nuts
Use these studs instead of bolts on your aftermarket exhaust manifold. We paired 12 steel alloy studs with 12 stainless steel nuts to prevent galling.
List Price: $55.00
Our Price: $48.00
Turbo Mounting Stud
These are the studs used to mount the turbo to a threaded manifold when a 1/2" spacer is used. We use these studs with a 1/2" spacer in our twin turbo kits. These are longer than the stock studs. Price is each.
XL Turbo Mounting Stud
These studs are used to mount a turbo to a threaded manifold when a custom 1" spacer is used.
Price is each stud.
List Price: $4.00
Our Price: $4.00
Gate Plate T-3
Stainless Diesel Gate Plate T-3 (Mounts between your manifold & turbo). Used when plumbing external wastegate. 1 inch.
